Avoid Scare Tactics within the Mold Industry

October 9, 2012 at 7:44 am 1 comment

Mold Scare Tactics

Unfortunately, there are a lot of “Scare Tactics” used within the microbial investigation and mold remediation industry. As with any industry, there are always going to be people out there who try and scare people into using their services. They may do so by embellishing facts, giving misinformation or by simply telling you things that are completely untrue. I want to give you, the consumer, a couple tips for what to watch out for if you are ever in a situation of having to enlist services within the microbial and mold remediation industry.

1) Pay close attention to each company’s website. Most companies have a website nowadays, and that can give you a good insight as to what type of company you will end up dealing with. Some companies websites are littered with misinformation and pictures geared towards scaring you into using their services. I have seen websites with embellished pictures of microscopic mold spores, but in reality just about anything looks scary when you magnify it 500 times. Also, if anywhere on their website you see the terms “Black Mold” or “Toxic Mold”, consider that a big red flag. Those terms were created by the media, and it wasn’t for their feel-good story of the evening if you know what I mean. It was to create interest as a result of fear. After all, who isn’t afraid of the term “toxic”?  You don’t hear many stories that start with toxic and end with a smile. You may also want to avoid companies that over emphasize the potential health effects of mold on people. Although it is good to be informed of potential signs of mold exposure and basic information regarding health, if a company’s main content of their website is to make you believe that you are definitely going to get sick after being around mold, it is probably another thing to be cautious of. And lastly, if somehow you have come across a company that does not even have a website, approach them with caution. If a company is not willing to provide basic information about them including their contact info, certification and affiliation information and a basic company profile it may be for good reason. They may be attempting to fly under the radar, or be quite new to the industry and have not yet put any effort into a website. I don’t know about you, but I don’t think I would trust a mold problem to the new guys on the block.

2) Be wary of remediation companies that do their own testing. Within our industry it is a direct conflict of interest for a remediation company to perform their own testing.  A large majority of the public has never dealt with a mold problem, or had to interpret a laboratory analysis of microbial samples.  Therefore, it could be somewhat easy for a remediation company to embellish sample results.  It is not uncommon to hear about a remediation company coming into a home and pulling some microbial samples, and upon receiving the results inform the client that the home is completely contaminated and they must vacate immediately or pay for expensive remediation. I had a client once tell me that a remediation company told her that she was being a bad mother because she was allowing her family to live in a mold infested home.  And that was based on a visual inspection alone.  Upon further investigation by an independent third party microbial investigator it was revealed that yes, they had a minimal mold problem but it was far less intense than the remediation company would have had her believe. You have to remember that a remediation company makes money off of cleaning up mold. Therefore, the more they have to clean or the larger the project, the more potential money they will make. So avoid being scared into expensive work that may not be needed and have an independent party look at the situation.

3) If you are ever in the middle of a microbial investigation and the inspector or contractor attempts to tell you what type of mold is present just by looking at it, be very cautious. I have heard multiple stories about contractors or inspectors coming in to look at a mold problem and attempting to identify what type of molds are present just by looking at it. Unfortunately, this is just not possible. There are literally tens of thousands of types of molds, many of them grow to be similar colors and textures and may display consistent growth patterns. The reality of it is, the only way to determine what type of mold is present is to analyze the growth under a high powered microscope, and this should only be done by a mycologist or technician within a laboratory setting. We hear about these tactics not only being used to scare people into remediation work that is not necessary, but also to deter people that really have a problem  from realizing it. For example, it is not uncommon for people in rental situations to be informed by maintenance personal that whatever microbial growth they have in their apartment or home is not the “bad kind”, or not toxic. I guess we would call this scenario an “Anti-Scare Tactic”. But again, the only way to know is to have microbial samples collected and properly analyzed. So unless the person you are dealing with just so happens to have microscopes for eyes, which would actually be pretty cool, watch out for this one.

If you really believe that you may have a mold problem, it is important to know that whomever you turn to for advice has your best interest in mind. The safest way to ensure this is to make sure that you always deal with an independent third party that has nothing to gain from finding a problem. You should also do all you can to research any companies that you may be considering using.  Make sure they are a legitimate company, they are properly certified and they should have a positive track record through organizations such as the Better Business Bureau.  You may be surprised what you find after doing a little investigation, for better or for worse.

Brandon Apple

by Brandon Apple, Mold Inspection Sciences

Advertisements

Entry filed under: General Mold Information, Mold Inspections, Mold myths. Tags: , .

Buying a Home with Potential Mold and Moisture Problems Fungal Data Interpretation – Part II – Effects of Tossing a Moldy Apple Pie into the Trash Before Mold Air Sampling

1 Comment

  • 1. Jeff @ Safe Disinfectants  |  January 28, 2013 at 3:40 pm

    Thanks for posting this Brandon. Good to see someone standing up for the consumers and trying to debunk the mold industry scare tactics!

Trackback this post


Follow us on Twitter

Contact Mold Inspection Sciences

Phoenix - 602.247.8681
Los Angeles - 310.451.9333
Orange County - 949.892.6343
San Diego - 619.618.2885
Seattle/Tacoma - 206.407.3352
Portland/Vancouver - 503.922.3399
Denver/Boulder - 303.339.0133
Cincinnati - 513.448.1253
Austin - 512.535.2493
Dallas/Fort Worth - 214.774.4380
San Antonio - 210.568.7725
Houston - 281.652.5353
www.moldsci.com

%d bloggers like this: